Passer aux informations sur le produit
USB Type-C Power Supply 140W PD3.1 Li-Ion Battery Adapter Converter for Makita Li-Ion Battery Chargers Digital Display Adapter
Prix promotionnel
$34.12
Prix régulier
$51.18
USB Type-C Power Supply: Enhanced Charging for Makita Batteries
USB Type-C Power Supply 140W PD3.1 Li-Ion Battery Adapter Converter for Makita Li-Ion Battery Chargers Digital Display Adapter
1. For Makita
100% Brand New and High Quality
Please Note :
(1). This product does not come with a battery!
(2). Please carefully confirm if you have the same battery as described below, otherwise do not place an order!
(3). If the product cannot function properly due to battery mismatch after placing the order, the buyer is responsible for it themselves!
(4). The size and color in the picture are for reference only. The actual received goods shall prevail. If you raise any objections based on "color and size differences", please do not purchase!
1. For Makita
Features :
【Compact and Protable】The product is small in design, light in weight and easy to carry. Whether you are at home, in the office or on a business trip, this voltage converter is a good choice.
【Safety Protection】The product has multiple protections such as overheat protection, short circuit protection, overvoltage protection and overcurrent protection, which greatly improves the safety of the product and you can use it safely.
【Securely locked】When the battery is docked, it will be securely locked in place by its own clip, the battery will not fall out
【Perfect Fit】Compatible for Makita 18V lithium-ion batteries, including BL1815 BL1820, BL1830, BL1840, BL1850, BL1860 etc.
【USB Port and Type-C Port】
Output 1: Type-C,PD
Output 2: USB/QC3.0
Enable (for Makita) 18V lithium-ion batteries to charge small electronic devices such as smartphones,
MP3 players, MP4 players, cameras and other USB devices when AC power is not available.
Input : Type-C,PD ( Can charge the BL1830 battery through the Type-C interface), replease DC18RC for makita
※ All input and output power depend on whether your plug and USB cable support the relevant protocol, so the actual power may not be consistent with the power achieved during testing
The test data is as follows :
Size : 93*67*42 mm ( As shown in the following figure )
Product Display :
Size : 93*67*42 mm ( As shown in the following figure )
Note:
Due to differences in lighting or angles during filming, there may be color differences between the actual object and the image.
The measurement allowed error is +/- 3cm .
Product Display :
Suitable for the following batteries:
(1). For Makita 18V lithium battery
(1). For Makita 18V lithium battery
18V: BL1815 BL1830 BL1840 BL1845 BL1860 and so on
as shown in the picture below:
as shown in the picture below:
Special reminder:
This model cannot be used for batteries with different brand models and appearance shapes (battery interfaces) from the above mentioned
(3). Tips: BL1415G BL1430G BL1815G BL1830G and all G series battery is not supported
Package Include :
1 * Adapter
1 * Adapter
as shown in the following picture
Usage scenarios
Precautions and Instructions:
(1). The values on the display screen are input and output parameters for the USB port, not for the battery.
It should be noted that:
(A) The voltage value during charging is the voltage value input from port C, and during discharging it is the voltage value output from port C, not the actual voltage value of the battery.
(B) The percentage value displayed on the battery level is based on the algorithm of this system and may not be consistent with the value displayed on the battery. Please use this as the standard! (Those who have objections to this should not place an order!).
(C) The actual charging power of the charger varies depending on the power of the power adapter you are using and the state of the battery, as shown in the above figure: it can reach a maximum of 138 watts, which is not constant, and the actual value is subject to the display during use.
(2). This product is easy to carry and can be used to charge BL1830 in places where there is a USB output port. However, it should be noted that the power adapter may protect due to excessive charging power (a common phenomenon in car use). Therefore, not all cars can use this product.
(3). Do not block the air inlet of the fan during use.
(4). The USB port is an output port that can only charge other batteries, such as mobile phones, laptops, etc. The Type C port is bidirectional, capable of both output and input, which can charge BL1830 and other batteries.
Efficiency with 140W PD3.1 Technology
The USB Type-C Power Supply offers a powerful 140W output, utilizing PD3.1 technology to deliver fast and efficient charging. This means you can charge your Makita Li-Ion batteries in a fraction of the time compared to traditional chargers. It's designed for convenience, ensuring that your devices are ready to go when you need them. This efficiency not only saves time but also allows you to maximize productivity on the job site.
Digital Display for Real-time Monitoring
One of the standout features of this adapter is its digital display. It shows real-time charging status and battery levels, so you always know how much power you have left. This is particularly useful because it provides peace of mind, allowing you to plan your work effectively without worrying about unexpected downtime. The clear display adds a level of user-friendliness that makes operation straightforward.
Versatile Compatibility with Makita Chargers
This USB Type-C Power Supply is expertly designed to be compatible with a wide range of Makita Li-Ion battery chargers. So, you don't have to be concerned about whether it will work with your specific model. Its versatility ensures that you get the most out of your investment, as it can support various battery types. Additionally, its compact design makes it easy to carry and use in various job scenarios, making it an ideal choice for professionals and DIY enthusiasts alike.